Archives des sciences

Abstrait

Materials Chemistry 2019: Nano-scale membranes based on polystyrene sulfonic acid blends - Thieo E Hogen Esch - University of Southern California

Thieo E Hogen Esch, Adam B Ung, Ming Li, Sergey Mukhin and G K Surya Prakash

Adaptable, robust, colorless and obvious poly vinylidenefluoride-olystyrenesulfonic acid (PVDFPSSA) proton exchange membranes1-3 had been synthesized with the useful resource of first mixing DMF solutions of PVDF and tetrabutylammonium poly styrene sulfonate (PTBASS) terpolymer having smaller (<20%) mole fractions of styrene (S) and four-chloromethyl styrene (CMS). The tetrabutylammonium styrene (BASS) sulfonate precursor monomer modified into synthesized through easy ion alternate of sodium styrene sulfonate and tetrabutylammonium-chloride or bromide. The PBASS terpolymer precursor becomes synthesized via a conventional radical copolymerization of BASS, styrene and CMS. The PVDF-PBASS blends are original via dissolution of the 2 polymers in DMF, observed with the aid of evaporation and thermal bypass-linking thru annealing at approximately 170C. The EAS type crosslinking appears to contain the formation of TBA benzyl sulfonates that may straight away benzilate the S and CMS devices of the terpolymer.

Fuel cells keep amazing promise for wide packages in transportable, residential, and big-scale power components. For low temperature gasoline cells, which include the proton change membrane fuel cells (PEMFCs) and direct methanol gasoline cells (DMFCs), proton-trade membranes (PEMs) are a key issue determining the gasoline cells overall performance. PEMs with high proton conductivity below anhydrous conditions can allow PEMFCs to be operated above one hundred °C, allowing use of hydrogen fuels with high-CO contents and improving the electrocatalytic hobby. PEMs with excessive proton conductivity and occasional methanol crossover are vital for lowering catalyst loadings at the cathode and improving the overall performance and lengthy-time period stability of DMFCs. This evaluate presents a precis of some of novel acid-base combination membranes along with an acidic polymer and a basic compound containing N-heterocycle corporations, which might be promising for PEMFCs and DMFCs. The PVDF-PBASS blends are optically obvious above approximately 165C and stay so after fast cooling accompanied with the aid of ion change mediated by a mixture of 1.Zero M H2SO4 and surfactants and repeated aqueous dialysis giving low (<40 wt%) water content PVDF-PSSA membranes.

Transmission electron microscopy confirms the presence of small (5 nm) PSSA domains the size and nature of which is still unknown. The water uptake, proton conductivity, ion exchange capacity (IEC), and methanol permeability of the membranes are tunable through variation of the PVDF/ PSSA content and the sulfonic acid content of the terpolymer. At higher PSSA
contents (>20 wt.%) the membranes were proven to have proton conductivities comparable or higher than Nafion-117 but extensively decrease methanol permeabilities. These low-value, environmentally attractive and conveniently on hand membranes can be used in direct methanol gas cells (DMFCs) and other applications.

Acid-base membranes containing acidic polymers and primary components, which can be functionalized inorganic, organic and polymers, have been largely advanced for high-temperature PEMFCs. This approach has been extensively used in the changes of the contemporary Nafion, SPEEK, SPSf, and sulfonated polystyrene in addition to novel synthesized copolymers. In this section, the recent progress in acid-base membranes based on those polymers for PEMFCs and the ability of those membranes are discussed.

The function of graft and diblock ionomer architecture at the morphology and houses of ionomer/fluoropolymer blends is examined. The graft copolymer consists of a partially fluorinated spine of P(VDF-co-CTFE) and partially sulfonated polystyrene (PS) side chains at the same time as the diblock copolymer consists of a block of P(VDF-co-HFP) and a partially sulfonated PS block. These ionomers are mixed with fluoropolymers owning a sequence length that fits the average collection length of the fluorous block segment of the ionomer. The consequences from this examine are unexpected: graft ionomers are mainly insensitive to mixing due to the incorporation of the non-ionic fluorous polymers into the domain names of the per fluorinated backbone which does not deleteriously affect the interconnecting proton conducting ionic clusters. In contrast, diblock ionomers are highly sensitive to the addition of fluoropolymers and regardless of the statement that ionic channels are retained, water sorption is decreased due to the increased extent of the non-ionic domain names, which decreases proton mobility and proton conductivity.