Journal of Bioremediation & Biodegradation

Abstrait

"Extraction of Nanocellulose from Banana Rachis (Agro-waste) and Preparation of Nanoellulose-Clay Nanofilter for the Industrial Wastewater Purification "

MD. Mahmudur Rahman and Mohd Maniruzzaman

Industrial dye wastes represent one of the most problematic groups of pollutants because they can be easily identified by the human naked eye and are not easily biodegradable. This research article highlights some recent development of Nanocellulose-Clay Nanofilter (NCCNF) in water treatment technologies. Nanocellulose (NC) was extracted for this research work from banana tree rachis fiber (Ebelmuschus esculentus L). Firstly, obtained raw fibers from banana rachis were treated with soap solution and benzene-alcohol (1:2) mixture then alkali wash with 17.5% NaOH solution and finally, bleaching as well as 60% sulphuric acid (H₂SO₄) hydrolysis was carried out on it successively. By this way NC was extracted successfully from raw rachis fiber. On the other hand, collected white clay treated with ethylene diamine (5%). In this work, we described briefly how NC was produced and its peripheral surfaces were activated for high adsorption. The anti-fouling properties of ‘NC-Clay’ based nano-filters will be also highlighted. However, NC-Clay Nanofilter (NCCNF) was prepared by solution casting method. And the samples i,e RF, ATF, BF, NC and NCCNF were characterized by Fourier transforms infrared spectroscopy (FTIR), Thermo gravimetric analysis (TGA), X-ray diffraction (X-RD), Scanning electron microscopy (SEM) analysis. Analysis data supports this bio nanofilter is highly crystalline, thermally stable, have good surface morphology, and also have strong composite forming capacity as well as biodegradable. On the other hand waste water containing heavy metal solutions were also characterized by UV-Visible and AAS techniques.